If the screen of your beloved iPhone 6 has suffered any kind of physical damage and your screen has been shattered beyond recognition, then you should waste no time in replacing it. But there are certain things that need to be kept in mind while doing so.

If you already bought ‘Apple Care’ then the DIY option is not for you. Making any move for automatic screen replacement will void the terms of the agreement and you will not be able to take advantage of ‘Apple Care’ benefits. However, it doesn’t matter if your iPhone 6 is still under warranty or not because the warranty does not cover any kind of physical or water damage.

Taking these factors into account will help you decide whether or not to continue. Make sure you have purchased a genuine Apple iPhone 6 screen and replacement tools for the job. Here are some simple DIY steps to guide you towards iPhone 6 screen replacement.

• Begin the process by removing the bottom screws with a pentalobe screwdriver. Removing these screws loosens the screen.

• To remove the broken screen, you can use an iSlack device which is a suction cup designed for that purpose. However, the screen must be removed halfway with the iSlack and the rest must be removed only after disconnecting the various cables and connectors.

• Remove the PCB connector board and connector cables. The process continues with the removal of the earpiece, camera, proximity sensor, light sensor, and microphone flex assembly.

• When removing such assemblies and connectors, you must be careful as most of them are attached with adhesive and applying excessive force can damage the components.

• Focus on removing the home button assembly and the home button itself. The button is fixed with an adhesive to the flex assembly that is embedded in the screen and must be removed carefully to avoid any type of damage.

• After carefully removing all those parts, you will find the LCD back plate which is attached with 7 Phillips screws.

Once you have removed the back plate from the old LCD screen, you can install the new screen and carefully place all the components in the exact order they were removed. It will be better if you write down the whole process in a sequence so that when you are reinstalling all the components you can refer to the notes and avoid errors.

For help or guidance, you can also watch a couple of videos online to get a better idea of ​​what to do when you replace iPhone screen parts. It is quite an easy process but you will have to be careful during the whole process. It is recommended to do it in a single uninterrupted session.